RightSize by Temsor

United States · design temperature

Heat pump sizing in Tucson, AZ

2 °C(36 °F) design temperature

Try the free calculator

Design temperature used for Tucson, AZ: 2 °C (36 °F) — the 99 % annual heating design temperature, from 10 years of reanalysis weather. Treat it as ±1 °C: your street can be colder or milder than the grid cell.

Climate at a glance

Heating needs are low here, so the oversizing risk is mostly about cooling and part-load efficiency. Almost no hours per year fall below 17 °F, so low-temperature capacity rarely decides the choice. Averages of 2015–2024 reanalysis weather for the grid cell around this city, not your street.

What that means for load

Design heat load = your home's heat-loss coefficient (UA) × (70 °F − 36 °F). Illustrative only — your own UA is what matters, and a contractor's quote is often sized from a rule of thumb instead:

UA (BTU/h·°F)Design load (BTU/h)≈ tons
2006,6960.6
30010,0440.8
40013,3921.1
50016,7401.4

Measure yours

Temsor RightSize reads 12–24 months of your utility bills, fits your real UA with an uncertainty range, and checks the heat pump you were quoted against real cold-climate capacity data. Try the free calculator.

Nearby cities

Engineering estimate, not a stamped Manual J / permit document. Method validated on simulated homes. See the disclaimer.